You may know that I am constantly on the hunt for great articles on Mechanical Engineering, recognizing that a Mechanical Engineering is
essential for the inf0.
I ran into a really good post that walks through Mechanical Engineering from a different point of view. Make sure you go over this article and inform me your opinion. Today’s article is titled title and you could read the entire article printed below for convenience:
A plate that is 5cm wide and 1 cm thick has a hole that is .25cm in diameter, is subjected to a tensile force of 60N. What is tensile failure strength must material possess to avoid failure? (Plate is made of a brittle material, so Maximum Shear Stress Theory is used, I believe)
Similar Posts
I am designing a stirling engine using stainless steel foil for a cylinder head material. The stainless steel foil is .002″ thick, and is type 304 with a max temp rating of 1800*F. The bore of the cylinder is 85.5mm. The foil will be secured to the cylinder with a flange which exposes as much as the surface area as the bore.
My question is……how do I know what the material strength is at an elevated temperature? I need to find out what my pressurisation limit is with the material so I don’t shoot my eye out. I plan to operate it to about 1200*F max. (allowing for hot spots)
From the context of the degrees offered by US Universities.
I am quite confused about these two and am interested in innovation rather than how materials are processed. Which one of the two can fit this request?
pls tell me the chenical, mechanical, and thermal properties of a composite. its hard to understand in book so i need a brief explanation thnx:D
